Device Introduction:
The water-based wave soldering fixture cleaning machine QYH-8600 is used for cleaning the outer surface of various workpieces. It is mainly used for cleaning wave soldering fixtures, reflow soldering tray condensers, and cleaning the surface flux, oil stains, dust, etc. of machine components.
Equipment features:
1. Configure advanced fully automatic touch screen operation software, save program files, simplify usage. One click operation, the entire cleaning process is fully automated, with automatic addition and discharge of rinse solution.
2. The amount of liquid added and discharged, as well as the frequency of cleaning and rinsing, can be set through the human-machine interface. The functions of cleaning, rinsing, air cutting, and drying are integrated.
3. The inner side of the cleaning chamber is treated with a 0.1mm thick nano surface to prevent water droplets from remaining in the box,
4. The equipment has low energy consumption, low operating noise, no pollution, energy conservation and environmental protection. The overall stainless steel structure occupies a small area.
5. To prevent the gas spring from slipping, it is safe and reliable. The upper cover is equipped with dual sensors on both sides, and a dual safety device is implemented.
After cleaning, the surface of the fixture is dry, with high cleanliness, and can be directly used for subsequent processes, which greatly improves the effect compared to manual cleaning.
7.720 degree rotation all-round spray, cleaning pressure reaches 0.3~0.6 (Mpa). The cleaning solution completely penetrates to the bottom of the fixture, cleaning without dead corners. The cleaning batch is large, which can save a lot of labor.
8. The nozzle pressure of the machine can be monitored during the cleaning process, and the cleaning room is equipped with a visual window, making the cleaning process clear at a glance and ensuring the cleaning effect.
